Anywhere on Earth.
Pull a place. Run the engine. Watch it solve.
Coming soon. Clips for this category are being prepared and will appear here as they're ready.
Title
Lead sentence.
More detail.
In MAGNET4WATER, the visualization streams in real time as the simulation advances. What you see is the simulation itself, frame by frame as it solves — not post-processing. Each clip above is a recording of one such session, run on a real place pulled from the global base model.
-
IGW-NET · Groundwater
Groundwater on real sites
Real aquifers, real basins. Pull a place — the geology, the hydrography, the wells, the recharge — straight from the global base model. Then watch IGW-NET stream the flow, particles, and plumes as the equations solve. Thirteen recorded sessions covering live aquifer modeling, particle tracking, plume migration, and well-capture analysis on georeferenced sites.
-
StormNET · Stormwater
Stormwater on real cities
Drag-and-connect stormwater design on a real city map. Sewers, ponds, green infrastructure — every component live, every cost computed, every storm simulated. Recorded sessions arriving as the library builds out.
-
StormNET · River Systems
River systems on real channels
River-network hydraulics on a georeferenced base — channel geometry from LiDAR, full St. Venant flow, flood inundation in 3D. Powered by StormNET's unsteady solver. Recorded sessions arriving as the library builds out.
-
SwaNET · Watersheds
Watersheds on real basins
Draw a box, pick an outflow, watch SwaNET delineate the watershed and run a complete SWAT simulation in minutes. Sankey water balance, USGS comparison, calibration with genetic algorithms — all on a real basin. Recorded sessions arriving as the library builds out.
-
ConduitNET · Water Distribution
Distribution on real cities
Pressurized water-supply networks designed on a real city. EPANET solving continuously as you build. Hydraulic grade line in 3D draped over neighborhoods. Cost across 258 world regions. Recorded sessions arriving as the library builds out.
-
DataNET · Data Fusion
Data fusion on real places
The data mind that feeds every other platform. Draw a box anywhere — watch elevation, geology, land use, hydrology, soil, climate fuse into a living 3D site model from NASA, USGS, NOAA, and ESA services. Recorded sessions arriving as the library builds out.
What you're looking at.
Most water modeling projects spend 80% of their time on data assembly, model construction, and format conversion — before any analysis begins. The Earth is already modeled. You just zoom in.
Above, a library of recorded sessions across six water domains — groundwater, stormwater, river systems, watersheds, distribution, and data fusion. Each one starts the same way: a box drawn on a real place, the global base model assembling the geology and hydrography, the engine streaming the solution as it solves. This is the same engine that runs in synthetic mode — applied to a specific place.
Ready to model your place?
Every simulation above started as a box drawn on a real map. Open the platform and try it on yours — no installation, runs in your browser.